Honda Pilot service tip

TPMS reset on Honda Pilot

Calibrate the tire pressure system after setting tire pressure. Match the display controls in your car, then follow the steps in order.

Model range	2009-2026
Common control path	vehicle settings calibration on most newer models
Before reset	Do not use TPMS reset to hide an active leak. Calibrate only after pressures are correct.

Steps

Set all four tires to the door placard pressure while the tires are cold.

Turn the vehicle on and open Vehicle Settings or TPMS Calibration.

Choose Calibrate, Initialize, or TPMS Calibration depending on the display wording.

Confirm the calibration prompt.

Drive for several minutes at normal road speed so the system can relearn.

If the light flashes or returns, check for a damaged sensor, leak, or incorrect pressure.

Do not use TPMS reset to hide an active leak. Calibrate only after pressures are correct.

Problem	Check
Menu is missing	Try the other display path for your year: dashboard button, steering-wheel menu, or touchscreen vehicle settings.
Light returns	Recheck the service or tire pressure first. A returning light usually means the underlying condition is still present.
Wrong trim	Use the owner manual if your trim has a different display, wheel controls, or tire package.

Why is the TPMS light still on?

The tires may not be at the correct pressure, the calibration drive may be incomplete, or a sensor may need service.

Do I reset TPMS after rotating tires?

On many Honda models, calibration is useful after rotation or pressure adjustment.

What does a flashing TPMS light mean?

A flashing light can point to a sensor or system fault rather than simple low pressure.